Omni Track Anchorages and Hardware

Omni L-Track Floor Anchorages solves the Operational and Liability issues the operator faced when mix matching Q’Straint and Sure-Lok Wheelchair Tie-Down Retractors, Manual Belts and Occupant Restraint in each other’s Floor Anchorages.

L-Track Floor Anchorages were designed, manufactured, tested and certified with the corresponding manufactures of the Wheelchair Securement and Occupant Restraint Systems. It was always recommended that the installation of the L-Track Floor Anchorages match that of the Wheelchair Tie-down installation. The introduction of the Omni Floor Anchor Systems ensures compatibility for testing and certification of both Q’Straint and Sure-Lok Wheelchair Tie-down and Occupant Restraint Systems and reduces the potential liability exposure.

Aluminum L-Track is the most common anchorage system utilized in the passenger transportation industry due to its superior strength and corrosion resistance. Omni L-Track features new profiles that are compatible with the two leading manufactures of Wheelchair Securement and Occupant Restraint Systems, Q’Straint and Sure-Lok.

Omni L-Track is available in three different profiles that include Regular, Flanged, and Angled in standard lengths of 100” with limited options on other sizes as well. Oval L-Track Floor Pockets, Covered Floor Pockets and Slide-N-Click anchorages are also available in the Omni class.

Omni Anchorage System Products have been tested to meet the following standards:

• Americans with Disabilities Act (ADA) - “Accessibility Specifications for Transportation
Vehicles”

• Applicable NHTSA Federal Motor Vehicles Safety Standards

• RESNA Vol. 4, Sec.18 Formerly SAEJ2249 - Recommended Practice – Wheelchair Tie-down
and Occupant Restraint Systems for use in Motor Vehicles

• ISO 10542 - Technical Systems and Aids for Disabled or Handicapped Persons - Wheelchair
Tie-down and Occupant Restraint Systems

• Canadian Standard Association (CSA) - “Mobility Aid and Occupant Restraint (MASOR)
systems”